Kidde KN-COPP-B-LPM: A Comprehensive Guide

Welcome to a comprehensive guide designed to help you understand and utilize your Kidde KN-COPP-B-LPM carbon monoxide alarm effectively. This guide will navigate through features, operation, maintenance, and troubleshooting, ensuring you maintain a safe and protected environment in your home.

The Kidde KN-COPP-B-LPM is a battery-operated carbon monoxide (CO) alarm designed for residential use. It’s engineered to detect CO levels, providing early warning against this silent, deadly gas. This model features a digital display, showing CO concentration in parts per million (PPM), offering real-time monitoring and historical peak level data.

Understanding the capabilities of your KN-COPP-B-LPM alarm is crucial for ensuring your family’s safety. This guide will explore key features, operating characteristics, and maintenance procedures. Proper installation, regular testing, and timely battery replacement are essential for optimal performance.

The KN-COPP-B-LPM also includes features like peak level memory, which records the highest CO concentration measured since the last reset. A test/reset button allows you to verify alarm functionality and silence the alarm during testing. This alarm is designed to provide continuous monitoring, even during power outages, enhancing its reliability and protection.

Key Features and Specifications

The Kidde KN-COPP-B-LPM carbon monoxide alarm comes equipped with several key features that enhance its functionality and reliability. It operates on three AA batteries, providing continuous protection even during power outages. The digital display shows CO levels in PPM, updating every 15 seconds for real-time monitoring.

A peak level memory feature records the highest CO concentration detected since the last reset, aiding in identifying potential CO sources. The test/reset button allows for easy testing of alarm operation and immediate silencing during non-emergency situations. A low battery signal alerts users when battery replacement is needed, ensuring uninterrupted protection.

Additional specifications include an operating temperature range of 40°F to 100°F and a humidity range of 5-95% relative humidity. The alarm is designed to detect CO concentrations as low as 11 PPM and up to 999 PPM. A slide-out battery door provides easy access for battery replacement, and a battery safeguard prevents closing the cover without batteries installed.

Understanding the Digital Display (PPM Levels)

The Kidde KN-COPP-B-LPM features a digital display that shows carbon monoxide levels in parts per million (PPM). This display provides real-time monitoring of CO concentration, updating every 15 seconds to reflect any changes in the environment.

Understanding PPM levels is crucial for interpreting the display readings. Low levels, typically below 10 PPM, are generally considered normal. Moderate levels, between 10 and 50 PPM, may indicate a potential CO source and warrant investigation. High levels, above 50 PPM, are dangerous and require immediate action, such as ventilating the area and evacuating if necessary.

The display also features a peak level memory, which records the highest CO concentration measured since the last reset. This allows users to identify potential CO incidents even if they were not present during the event. The display can show readings from as low as 11 PPM to as high as 999 PPM, providing a wide range of detection capabilities. Familiarizing yourself with these levels ensures you can respond appropriately to protect your health and safety.

Operating Characteristics and Functionality

The Kidde KN-COPP-B-LPM carbon monoxide alarm is designed for continuous monitoring of CO levels within a specified range. It operates on three AA batteries, ensuring functionality even during power outages, offering constant protection.

A key feature is its peak level memory, accessible via a dedicated button. Pressing and holding this button displays the highest CO reading recorded since the last reset, aiding in identifying intermittent CO sources. The alarm is designed to detect CO concentrations as low as 11 PPM and as high as 999 PPM, providing a comprehensive monitoring range.

The unit is equipped with a test/reset button, allowing users to verify the alarm’s operational status. Regular testing ensures the sensor and alarm circuits are functioning correctly. The alarm is designed to operate within a temperature range of 40°F to 100°F and a humidity range of 5% to 95% relative humidity. This alarm provides reliable protection against the dangers of carbon monoxide.

Testing the Alarm: A Step-by-Step Guide

To ensure the Kidde KN-COPP-B-LPM alarm is functioning correctly, regular testing is essential. Here’s a step-by-step guide:

1. Locate the Test/Reset button on the front of the unit.



2. Press and hold the button for a few seconds.
3. Listen for the alarm to sound, characterized by four quick beeps, followed by a brief pause, and then another four quick beeps.
4. Observe the red LED, which should flash in sync with the beeps.
5. For models with a digital display, it will show three dashes (—) briefly, followed by “888” to indicate the test is in progress.
6. Release the Test/Reset button after confirming the alarm sounds.
7. The alarm will automatically return to its monitoring state within seconds.

It is recommended to test the alarm weekly to ensure proper operation. If the alarm fails to sound or the LED doesn’t flash, refer to the troubleshooting section or contact Kidde support.

Battery Replacement: A Detailed Procedure

Maintaining a functional Kidde KN-COPP-B-LPM alarm requires timely battery replacements. Here’s a detailed procedure:

1. Gently slide open the battery compartment door located on the bottom of the alarm.
2. Remove the old batteries, noting the polarity (+/-) indicated inside the compartment.
3. Properly dispose of the used batteries according to local regulations.
4. Insert three new AA batteries, ensuring correct polarity alignment.
5. Kidde recommends using Duracell MN1500 or MX1500, Energizer E91, Gold Peak 15A, or Golden Power GLR6A batteries.
6. Slide the battery compartment door closed. The door will not close if batteries are not installed correctly.
7. Press the Test/Reset button to verify the alarm functions with the new batteries.
8. Check that the green LED flashes approximately every 30 seconds.

Replace batteries annually or when the low battery signal sounds (a single chirp). Regularly replacing the batteries ensures the device remains operational.

Troubleshooting False Alarms

False alarms from your Kidde KN-COPP-B-LPM can be disruptive, but often resolvable. Here’s how to troubleshoot:

1. Identify Potential Sources: Cooking fumes, steam from showers, excessive dust, or cleaning chemicals can trigger alarms.
2. Relocate the Alarm: If false alarms are frequent, move the alarm away from these sources, adhering to installation guidelines.
3. Clean the Alarm: Use a soft brush or vacuum to gently remove dust from the vents. Avoid using detergents or solvents;
4. Check Environmental Conditions: Ensure the alarm operates within the specified temperature and humidity ranges.
5. Test the Alarm: Press the Test/Reset button to confirm proper function. If the alarm doesn’t respond, replace the batteries.
6. Consider Replacement: If false alarms persist despite troubleshooting, the sensor may be faulty, necessitating a replacement.

Persistent false alarms could indicate a malfunction. Contact Kidde customer support for assistance if the issue continues after these steps. Regular maintenance and strategic placement can minimize false alarms.

Cleaning and Maintenance Tips

Maintaining your Kidde KN-COPP-B-LPM carbon monoxide alarm is crucial for its proper function and longevity. Follow these tips to ensure it remains reliable:

1. Regular Dusting: Dust the alarm monthly using a soft brush or vacuum cleaner to remove accumulated dust from the vents.
2. Gentle Cleaning: Avoid using liquids, detergents, or solvents, which can damage the sensor.
3. Avoid Aerosols: Do not spray air fresheners, cleaning sprays, or other aerosols near the alarm.
4. Never Paint: Painting the alarm can seal the vents and impair its ability to detect carbon monoxide.
5. Test Regularly: Test the alarm weekly by pressing the Test/Reset button to ensure the alarm is functioning correctly.
6. Replace Batteries: Replace the batteries at least once a year, or when the low battery signal is heard.
7. Proper Placement: Ensure the alarm is properly mounted according to the manufacturer’s instructions.

Proper cleaning and maintenance will help prevent false alarms and ensure that your Kidde KN-COPP-B-LPM alarm is ready to alert you to dangerous carbon monoxide levels.

Interpreting Alarm Signals and What to Do

Understanding the alarm signals of your Kidde KN-COPP-B-LPM is essential for safety. Here’s what different signals mean and how to respond:

• Four Beeps Followed by Silence: This indicates the presence of carbon monoxide; Immediately move to fresh air outdoors and call emergency services.
• Continuous Beeping: This also indicates the presence of carbon monoxide. Follow the same procedure as above.
• Single Chirp Every Minute: This signals a low battery. Replace the batteries immediately with recommended brands like Duracell or Energizer.
• Three Chirps: The alarm has reached the end of its life and must be replaced immediately.
• Digital Display: The display shows the carbon monoxide level in PPM. Levels above 70 PPM require immediate action.

In any alarm situation, prioritize safety. Evacuate the premises, ensure everyone is accounted for, and contact emergency services. Do not re-enter until the situation is resolved by qualified professionals.

Accessing and Understanding the User Manual

The user manual for the Kidde KN-COPP-B-LPM is a vital resource for understanding its features and operation. You can access it online through the Kidde website or various online manual repositories. Search for “Kidde KN-COPP-B-LPM manual” to find a downloadable PDF version. The manual covers essential information, including:

• Installation Instructions: Proper placement and mounting guidelines.
• Operating Characteristics: Details on how the alarm detects carbon monoxide.
• Alarm Response: What to do when the alarm sounds.
• Maintenance: Cleaning and battery replacement procedures.
• Troubleshooting: Solutions for common issues like false alarms.
• Warranty Information: Details on the product’s warranty coverage.

Familiarize yourself with the manual to ensure you use the alarm correctly and maintain its effectiveness. Pay close attention to safety precautions and recommended battery types. Keep the manual in an easily accessible location for future reference.

Contacting Kidde Customer Support

For any unresolved issues or questions regarding your Kidde KN-COPP-B-LPM carbon monoxide alarm, contacting Kidde Customer Support is a valuable step. Kidde provides multiple channels for customer assistance to address inquiries, troubleshooting, or warranty claims. You can reach them via:

• Phone: Call their consumer hotline for immediate assistance. The number is usually found on the product packaging or the Kidde website.
• Email: Send an email detailing your issue for a written response.
• Website: Visit the Kidde website for FAQs, support articles, and contact forms.

When contacting support, be prepared to provide the model number (KN-COPP-B-LPM), date of purchase, and a detailed description of the problem. If possible, have your user manual handy for reference. Kidde’s support team can offer expert guidance, resolve complex issues, and provide information on product replacements or warranty services. They are dedicated to ensuring your safety and satisfaction with their products.